มอก. 3587-2566
การหาการแตกสลายทางชีวภาพในขั้นสุดท้าย แบบใช้ออกซิเจนของพลาสติกในตัวกลางที่เป็นน้ำ - วิธีวิเคราะห์ความต้องการออกซิเจนด้วยเครื่องวัดการหายใจแบบปิด
DETERMINATION OF THE ULTIMATE AEROBIC BIODEGRADABILITY OF PLASTIC MATERIALS IN AN AQUEOUS MEDIUM - METHOD BY MEASURING THE OXYGEN DEMAND IN A CLOSED RESPIROMETER
ขอบข่ายมาตรฐาน
- กำหนดขึ้นโดยรับ ISO 14851:2019 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by measuring the oxygen demand in a closed respirometer มาใช้โดยวิธีการพิมพ์ซ้ำ (reprinting) ในระดับที่เหมือนกันทุกประการ (identical) โดยใช้ ISO ฉบับภาษาอังกฤษเป็นหลัก - เป็นวิธีวัดปริมาณความต้องการออกซิเจนด้วยเครื่องวัดอัตราการหายใจแบบปิดในการหาระดับการแตกสลายทางชีวภาพของวัสดุพลาสติก รวมถึงวัสดุพลาสติกที่มีสารเติมแต่ง วิธีทดสอบนี้เป็นการทดสอบในตัวกลางที่เป็นน้ำภายใต้สภาวะห้องปฏิบัติการ โดยใช้หัวเชื้อ (inoculum) จากแอกทิเวเต็ตสลัดจ์ (activated sludge) - กรณีใช้แอกทิเวเต็ตสลัดจ์ที่ไม่ผ่านการปรับสภาพเป็นหัวเชื้อจะเป็นการทดสอบแบบจำลองสภาวะการแตกสลายทางชีวภาพที่เกิดขึ้นตามแหล่งน้ำธรรมชาติ กรณีใช้หัวเชื้อผสม หรือหัวเชื้อที่สัมผัสกับตัวอย่างทดสอบล่วงหน้าก่อนเริ่มทำการทดสอบ (pre-exposed inoculum) จะเป็นการทดสอบเพื่อหาศักยภาพการแตกสลายทางชีวภาพของตัวอย่างทดสอบ - สภาวะทดสอบที่ใช้ในมาตรฐานนี้อาจไม่สอดคล้องกับสภาวะที่ดีที่สุดที่ทำให้พลาสติกเกิดการแตกสลายทางชีวภาพได้สูงสุด แต่มาตรฐานนี้ถูกออกแบบมาเพื่อหาศักยภาพของการแตกสลายทางชีวภาพของวัสดุพลาสติก หรือบ่งชี้ความสามารถในการแตกสลายทางชีวภาพที่เกิดขึ้นตามธรรมชาติ - วิธีประเมินความสามารถในการแตกสลายทางชีวภาพนี้สามารถทำให้ดีขึ้นได้ด้วยการคำนวณสมดุลคาร์บอน - วิธีนี้ใช้ได้กับวัสดุดังต่อไปนี้ - พอลิเมอร์ธรรมชาติ และ/หรือพอลิเมอร์สังเคราะห์ และโคพอลิเมอร์หรือพอลิเมอร์ผสม - วัสดุพลาสติกที่มีสารเติมแต่ง เช่น พลาสติไซเซอร์ สารให้สี หรือสารประกอบอื่น ๆ - พอลิเมอร์ละลายน้ำได้ - วัสดุที่ไม่ยับยั้งการเจริญเติบโตของเชื้อจุลินทรีย์ในหัวเชื้อภายใต้ภาวะทดสอบนี้ สามารถหาผลการยับยั้งการเจริญเติบโตได้ด้วยการใช้ชุดควบคุมการยับยั้ง หรือวิธีอื่นที่เหมาะสม เช่น ISO 8192 กรณีที่วัสดุทดสอบยับยั้งหัวเชื้อ ให้ทดสอบโดยใช้ตัวอย่างที่มีความเข้มข้นลดลง หรือหัวเชื้อชนิดอื่น หรือหัวเชื้อที่สัมผัสกับตัวอย่างทดสอบล่วงหน้าก่อนเริ่มทำการทดสอบ
Scope (English)
This document specifies a method, by measuring the oxygen demand in a closed respirometer, for the determination of the degree of aerobic biodegradability of plastic materials, including those containing formulation additives. The test material is exposed in an aqueous medium under laboratory conditions to an inoculum from activated sludge. If an unadapted activated sludge is used as the inoculum, the test simulates the biodegradation processes which occur in a natural aqueous environment; if a mixed or pre-exposed inoculum is used, the method is used to investigate the potential biodegradability of a test material. The conditions used in this document do not necessarily correspond to the optimum conditions allowing maximum biodegradation to occur, but this document is designed to determine the potential biodegradability of plastic materials or give an indication of their biodegradability in natural environments. The method enables the assessment of the biodegradability to be improved by calculating a carbon balance (optional, see Annex E). The method applies to the following materials. - Natural and/or synthetic polymers, copolymers or mixtures thereof. - Plastic materials which contain additives such as plasticizers, colorants or other compounds. - Water-soluble polymers. - Materials which, under the test conditions, do not inhibit the microorganisms present in the inoculum. Inhibitory effects can be determined using an inhibition control or by another appropriate method (see, for example, ISO 8192[2]). If the test material is inhibitory to the inoculum, a lower test concentration, another inoculum or a pre-exposed inoculum can be used.
คำถามที่พบบ่อยเกี่ยวกับ มอก. 3587-2566
มอก. 3587-2566 เป็นมาตรฐานบังคับหรือไม่?
เป็นมาตรฐานทั่วไป (สมัครใจ) - ผู้ผลิตสามารถขอการรับรองมาตรฐานได้โดยสมัครใจ เพื่อสร้างความน่าเชื่อถือให้กับผลิตภัณฑ์
มอก. 3587-2566 ครอบคลุมอะไรบ้าง?
- กำหนดขึ้นโดยรับ ISO 14851:2019 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by measuring the oxygen demand in a closed respirometer มาใช้โดยวิธีการพิมพ์ซ้ำ (reprinting) ในระดับที่เหมือนกันทุกประการ (identical) โดยใช้ ISO ฉบับภาษาอังกฤษเป...
วิธีตรวจสอบผลิตภัณฑ์
- ดูเครื่องหมาย มอก. บนผลิตภัณฑ์หรือบรรจุภัณฑ์
- ตรวจสอบเลข มอก. ว่าตรงกับประเภทสินค้า
- ดูชื่อผู้ผลิตหรือผู้นำเข้าที่ระบุบนฉลาก
- สามารถตรวจสอบรายชื่อผู้ได้รับใบอนุญาตได้ที่ appdb.tisi.go.th