มอก. 3492-2565
การเก็บค่าธรรมเนียมอิเล็กทรอนิกส์ - การสื่อสารเพื่อตรวจสอบการปฏิบัติตามข้อกำหนดสำหรับระบบอัตโนมัติ
ELECTRONIC FEE COLLECTION - COMPLIANCE CHECK COMMUNICATION FOR AUTONOMOUS SYSTEMS
ขอบข่ายมาตรฐาน
- ระบุข้อกำหนดสำหรับการสื่อสารระยะใกล้เพื่อตรวจสอบการปฏิบัติตามข้อกำหนดในระบบเก็บค่าธรรมเนียมอิเล็กทรอนิกส์อัตโนมัติ การสื่อสารเพื่อตรวจสอบการปฏิบัติตามข้อกำหนด (compliance checking communication : CCC) จะเข้ามาทำหน้าที่เป็นตัวกลางระหว่างอุปกรณ์ออนบอร์ดบนตัวรถ (road vehicle's on-board equipment : OBE) กับ อินเตอร์โรเกเตอร์ (interrogator) (อุปกรณ์ที่ติดตั้งอยู่ข้างถนน,อุปกรณ์เคลื่อนที่หรืออุปกรณ์มือถือ) และทำหน้าที่กำหนดว่าข้อมูลที่ส่งโดย OBE นั้น ถูกต้อง สอดรับกับการใช้ถนนของยานพาหนะที่เป็นไปตามกฎเกณฑ์การเก็บค่าผ่านทาง - ผู้ดำเนินการเกี่ยวกับอินเตอร์โรเกเตอร์ในการตรวจสอบการปฏิบัติตามข้อกำหนด (the operator of the compliance checking interogator) ถือว่าเป็นส่วนหนึ่งของบทบาทการเรียกเก็บค่าผ่านทางตามที่กำหนดไว้ใน ISO 17573-1 การสื่อสารเพื่อตรวจสอบการปฏิบัติตามข้อกำหนด อนุญาตให้การชี้บ่งของ OBE ยานพาหนะและสัญญา และการยืนยันว่าผู้ขับขี่ได้ปฏิบัติตามภาระหน้าที่และสถานะการตรวจสอบและสมรรถนะของ OBE การสื่อสารเพื่อตรวจสอบการปฏิบัติตามข้อกำหนด จะอ่านข้อมูล OBE แต่จะไม่มีการเขียนข้อมูล OBE - ใช้กับ OBE ในโหมดการทำงานอัตโนมัติ ไม่ใช้กับการตรวจสอบการปฏิบัติตามข้อกำหนดของระบบเก็บค่าผ่านทางที่ใช้การสื่อสารระยะใกล้ (dedicated short-range communication: DSRC) - กำหนดไวยากรณ์ข้อมูลและความหมาย แต่ไม่ใช่ลำดับการสื่อสาร คุณสมบัติที่ระบุไว้ในมาตรฐานผลิตภัณฑ์อุตสาหกรรมฉบับนี้เป็นสิ่งจำเป็นสำหรับ OBE ใด ๆ ที่อ้างว่าสอดคล้องกับมาตรฐานผลิตภัณฑ์อุตสาหกรรมฉบับนี้ ถึงแม้ว่าค่าบางอย่างถูกตั้งเป็น "ไม่ได้กำหนด (not defined)" ในกรณีที่การทำงานดังกล่าวไม่ปรากฎอยู่ใน OBE ก็ตาม อินเตอร์โรเกเตอร์มีอิสระในการเลือกว่าคุณสมบัติใดบ้างจะถูกอ่านในขั้นตอนการรับข้อมูล รวมถึงลำดับขั้นในการอ่านข้อมูล เพื่อทำให้เกิดความเข้ากันได้กับระบบที่มีอยู่ การสื่อสารจะใช้คุณสมบัติใดที่ถูกกำหนดไว้ใน ISO 14906 ในทุกที่ที่เกิดประโยชน์ - การสื่อสารเพื่อตรวจสอบการปฏิบัติตามข้อกำหนดเหมาะสำหรับช่วงของสื่อการสื่อสารระยะใกล้ บทนิยามเฉพาะที่ให้ไว้สำหรับ CEN-DSRC ถูกระบุไว้ใน EN 15509 เช่นเดียวกับการใช้ ISO CALM IR,Italian DSRC ถูกระบุไว้ใน ETSI ES 200 674-1, ARIB DSRC และ WAVE DSRC เพื่อเป็นทางเลือกแทน CEN- DSRC คุณสมบัติและการทำงานที่ระบุมีไว้เพื่อการตรวจสอบการปฏิบัติตามข้อกำหนดโดยใช้บริการสื่อสาร DSRC ที่จัดเตรียมโดยชั้นแอปพลิเคชัน DSRC โดยมีคุณสมบัติและการทำงาน ที่พร้อมใช้งานสำหรับแอปพลิเคชัน การสื่อสารเพื่อตรวจสอบการปฏิบัติตามข้อกำหนดที่อุปกรณ์ภาคสนาม (roadside equipment : RSE) และ OBE คุณสมบัติและการทำงานถูกกำหนดในระดับของหน่วยข้อมูลแอปพลิเคชัน (application data units : ADU) - คำจำกัดความของการสื่อสารเพื่อตรวจสอบการปฏิบัติตามข้อกำหนด รวมถึง: - อินเตอร์เฟสของแอปพลิเคชันระหว่าง OBE และ RSE (ดังแสดงในรูปที่ 2) - การใช้เลเยอร์ของแอปพลิเคชัน DSRC ทั่วไป (generic DSRC application layer) ตามที่ระบุใน ISO 15628 และ EN 12834 - ข้อกำหนดประเภทข้อมูลการสื่อสารเพื่อตรวจสอบการปฏิบัติตามข้อกำหนด ตามที่ระบุไว้ใน Annex A; - เอกสารประกาศการปฏิบัติตามโพรฟอร์มาโพรโตคอล (PICSProforma) ตามที่ระบุไว้ใน Annex B. - การใช้สแต็ค CEN-DSRC ตามที่ระบุไว้ใน EN 15509 หรือสแต็ค DSRC ที่เทียบเท่าอื่น ๆ ตามที่อธิบายไว้ใน Annex C, Annex D, Annex E และ Annex F; - บริการรักษาความปลอดภัยสำหรับการรับรองความถูกต้องร่วมกันของพันธมิตรการสื่อสารและการลงนามในข้อมูล (signing of data) (ดู Annex H) — ตัวอย่างการทำธุรกรรม การสื่อสารเพื่อตรวจสอบการปฏิบัติตามข้อกำหนด ตามที่เสนอใน Annex G; - Annex I ให้ข้อมูลรายละเอียดเกี่ยวกับวิธีใช้เอกสารนี้สำหรับบริการโทรทางอิเล็กทรอนิกส์ของยุโรป (ตามที่กำหนดไว้มติของคณะกรรมาธิการ 2009/750/EC) - ข้อกำหนดการทดสอบไม่อยู่ในขอบเขตของเอกสารนี้ หมายเหตุ ชุดทดสอบสำหรับตรวจสอบการนำ OBE หรือ RSE ไปใช้เพื่อให้สอดคล้องกับเอกสารนี้กำหนดไว้ใน ISO 13143-1 และ ISO 13143-2 รุ่นที่เกี่ยวข้อง รูปที่ 2 - การสื่อสารเพื่อตรวจสอบการปฏิบัติตามข้อกำหนดอินเตอร์เฟสของแอปพลิเคชัน รายละเอียดให้เป็นไปตาม ISO 12813:2019 ข้อ 1
Scope (English)
This document defines requirements for short-range communication for the purposes of compliance checking in autonomous electronic fee collecting systems. Compliance checking communication (CCC) takes place between a road vehicle's on-board equipment (OBE) and an interrogator (roadside mounted equipment, mobile device or hand-held unit), and serves to establish whether the data that are delivered by the OBE correctly reflect the road usage of the corresponding vehicle according to the rules of the pertinent toll regime. The operator of the compliance checking interrogator is assumed to be part of the toll charging role as defined in ISO 17573-1. The CCC permits identification of the OBE, vehicle and contract, and verification of whether the driver has fulfilled his obligations and the checking status and performance of the OBE. The CCC reads, but does not write, OBE data. This document is applicable to OBE in an autonomous mode of operation; it is not applicable to compliance checking in dedicated short-range communication (DSRC)-based charging systems. It defines data syntax and semantics, but not a communication sequence. All the attributes defined herein are required in any OBE claimed to be compliant with this document, even if some values are set to "not defined" in cases where certain functionality is not present in an OBE. The interrogator is free to choose which attributes are read in the data retrieval phase, as well as the sequence in which they are read. In order to achieve compatibility with existing systems, the communication makes use of the attributes defined in ISO 14906 wherever useful. The CCC is suitable for a range of short-range communication media. Specific definitions are given for the CEN-DSRC as specified in EN 15509, as well as for the use of ISO CALM IR, the Italian DSRC as specified in ETSI ES 200 674-1, ARIB DSRC and WAVE DSRC as alternatives to the CEN-DSRC. The attributes and functions defined are for compliance checking by means of the DSRC communication services provided by DSRC application layer, with the CCC attributes and functions made available to the CCC applications at the roadside equipment (RSE) and OBE. The attributes and functions are defined on the level of application data units (ADU). The definition of the CCC includes: - the application interface between OBE and RSE (as depicted in Figure 2); - use of the generic DSRC application layer as specified in ISO 15628 and EN 12834; - CCC data type specifications given in Annex A; - a protocol implementation conformance statement (PICS) proforma is given in Annex B; - use of the CEN-DSRC stack as specified in EN 15509, or other equivalent DSRC stacks as described in Annex C, Annex D, Annex E and Annex F; - security services for mutual authentication of the communication partners and for signing of data (see Annex H); - an example CCC transaction is presented in Annex G; - the informative Annex I highlights how to use this document for the European electronic toll service (as defined in Commission Decision 2009/750/EC). Test specifications are not within the scope of this document.
คำถามที่พบบ่อยเกี่ยวกับ มอก. 3492-2565
มอก. 3492-2565 เป็นมาตรฐานบังคับหรือไม่?
เป็นมาตรฐานทั่วไป (สมัครใจ) - ผู้ผลิตสามารถขอการรับรองมาตรฐานได้โดยสมัครใจ เพื่อสร้างความน่าเชื่อถือให้กับผลิตภัณฑ์
มอก. 3492-2565 ครอบคลุมอะไรบ้าง?
- ระบุข้อกำหนดสำหรับการสื่อสารระยะใกล้เพื่อตรวจสอบการปฏิบัติตามข้อกำหนดในระบบเก็บค่าธรรมเนียมอิเล็กทรอนิกส์อัตโนมัติ การสื่อสารเพื่อตรวจสอบการปฏิบัติตามข้อกำหนด (compliance checking communication : CCC) จะเข้ามาทำหน้าที่เป็นตัวกลางระหว่างอุปกรณ์ออนบอร์ดบนตัวรถ (road vehicle's on-board equipment : OB...
วิธีตรวจสอบผลิตภัณฑ์
- ดูเครื่องหมาย มอก. บนผลิตภัณฑ์หรือบรรจุภัณฑ์
- ตรวจสอบเลข มอก. ว่าตรงกับประเภทสินค้า
- ดูชื่อผู้ผลิตหรือผู้นำเข้าที่ระบุบนฉลาก
- สามารถตรวจสอบรายชื่อผู้ได้รับใบอนุญาตได้ที่ appdb.tisi.go.th